General

I suggest you ...

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  • Hot ideas
  • Top ideas
  • New ideas
  • My feedback
  1. Posibilty of setting the paper thickness allready in dieline creator

    When creating a new dieline, the board thickness should be possible to set, so that the file created takes the board thickness into account, so that the fold at e.g. the lid, does actually go 1 x board-thickness higher, than the dustflap, to make it possible to close the box.
    The thicker paper/board or corrugated, the bigger an issue.

    23 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      I agree to the terms of service
      Signed in as (Sign out)
      You have left! (?) (thinking…)
      1 comment  ·  Origami  ·  Flag idea as inappropriate…  ·  Admin →
    • Adjust paper thickness in templates and allow saving of created templates

      When choosing a existing template, make adjustment for paper thickness. Also a library with created templates, where you can save, import or edit templates.

      13 votes
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        I agree to the terms of service
        Signed in as (Sign out)
        You have left! (?) (thinking…)
        0 comments  ·  Origami  ·  Flag idea as inappropriate…  ·  Admin →
      • Look at your tuck-flap closures - they are incorrect in all instances.

        Your tuck flap closures are incorrect in all instances - instead of being a dead split along the lid, they should angle across and then up to capture the slits in the tuck flap (which is also incorrect, should be inset by the width of the card)

        1 vote
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          I agree to the terms of service
          Signed in as (Sign out)
          You have left! (?) (thinking…)
          1 comment  ·  Origami  ·  Flag idea as inappropriate…  ·  Admin →
        • Add components feature

          Sometimes I need to render a scene with multiple copies of the same object, say - a hard cover book. When I create the first copy, I then duplicate it several times and create a template for that scene. The next time I need to use that scene, with a different book cover - I have to replace each and every one of the covers and that is very time consuming and sometimes a bit hard to reach on the scene.

          I wonder if a single completed book (with all it's parts - front cover, spine, head and tail bands,…

          3 votes
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            I agree to the terms of service
            Signed in as (Sign out)
            You have left! (?) (thinking…)
            0 comments  ·  Boxshot Shapes  ·  Flag idea as inappropriate…  ·  Admin →
          • gap detection

            it Would be vry good if in Origami, it could be indicated where a gap exists in a box design... i Receive die cut designs from our manufacturers in china every day and though i have been partially succesful in instructing them to create origami -ready die cuts, many times, when testing their designs,it turns out that the outline isn't completely closed and it takes me forever to check the illustrator file for these gaps.

            5 votes
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              I agree to the terms of service
              Signed in as (Sign out)
              You have left! (?) (thinking…)
              under review  ·  2 comments  ·  Origami  ·  Flag idea as inappropriate…  ·  Admin →
            • 3 votes
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                I agree to the terms of service
                Signed in as (Sign out)
                You have left! (?) (thinking…)
                0 comments  ·  Boxshot VR  ·  Flag idea as inappropriate…  ·  Admin →
              • In Owlet have abilities to save scene properties in snapshots as a 5th option

                When we create a snapshot for the camera state it would be nice that we also have the option to save the scene properties. It could be a 5th check mark under SAVED INFORMATION.

                3 votes
                Vote
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  I agree to the terms of service
                  Signed in as (Sign out)
                  You have left! (?) (thinking…)
                  1 comment  ·  Owlet  ·  Flag idea as inappropriate…  ·  Admin →
                • See under the floor

                  I just installed KORU 1.2.2 and now I can't rotate the object to see its bottom if I don't switch off 'show floor' first.
                  This version doesn't let you go under the floor if it is enabled.
                  I just think it was better before than now, when the floor was visible from above, and it vanished when the view went down, since a 'shadow on the floor' is nice and useful when viewing from atop, but is also useful if you can view from below.

                  6 votes
                  Vote
                  Sign in
                  Check!
                  (thinking…)
                  Reset
                  or sign in with
                  • facebook
                  • google
                    Password icon
                    I agree to the terms of service
                    Signed in as (Sign out)
                    You have left! (?) (thinking…)
                    0 comments  ·  Koru  ·  Flag idea as inappropriate…  ·  Admin →
                  • Fix overlapping rendering

                    If I have 2 perfectly overlapping sides/panels I'd like to be able to tell Origami which one I want on top of the other.
                    Such as a simple "TOP SIDE" label could do.

                    3 votes
                    Vote
                    Sign in
                    Check!
                    (thinking…)
                    Reset
                    or sign in with
                    • facebook
                    • google
                      Password icon
                      I agree to the terms of service
                      Signed in as (Sign out)
                      You have left! (?) (thinking…)
                      1 comment  ·  Boxshot Other  ·  Flag idea as inappropriate…  ·  Admin →
                    • Curved packaging

                      Dear Origami, you software is easy to use and does what it’s made for. Just one small gap: add a feature to make it possible to create curved packagings. That would be great!

                      45 votes
                      Vote
                      Sign in
                      Check!
                      (thinking…)
                      Reset
                      or sign in with
                      • facebook
                      • google
                        Password icon
                        I agree to the terms of service
                        Signed in as (Sign out)
                        You have left! (?) (thinking…)
                        2 comments  ·  Boxshot Shapes  ·  Flag idea as inappropriate…  ·  Admin →
                      • NVIDIA GPU rendering support!

                        NVIDIA GPU supported rendering. It would render in no time compared to the CPU based rendering now. All else is lovely in this product; but this is a MAJOR drawback for me!!

                        1 vote
                        Vote
                        Sign in
                        Check!
                        (thinking…)
                        Reset
                        or sign in with
                        • facebook
                        • google
                          Password icon
                          I agree to the terms of service
                          Signed in as (Sign out)
                          You have left! (?) (thinking…)
                          0 comments  ·  Owlet  ·  Flag idea as inappropriate…  ·  Admin →
                        • When adding a scene to render later only copy visible objects of the scene

                          In big scenes with multiple objects we can do renders with only a few objects visible. But when we do a "render later" it copies the whole scene in to the render queue instead of only the visible objects that are currently rendered. And it makes for unnecessary weight and time to copy the whole scene. If it would only copy objects that are visible it be much much faster.

                          3 votes
                          Vote
                          Sign in
                          Check!
                          (thinking…)
                          Reset
                          or sign in with
                          • facebook
                          • google
                            Password icon
                            I agree to the terms of service
                            Signed in as (Sign out)
                            You have left! (?) (thinking…)
                            0 comments  ·  Owlet  ·  Flag idea as inappropriate…  ·  Admin →
                          • Box with a handle

                            I am looking for a box with a handle. You can see an example here.

                            http://www.cleanwatertech.se/produkt/rt/

                            1 vote
                            Vote
                            Sign in
                            Check!
                            (thinking…)
                            Reset
                            or sign in with
                            • facebook
                            • google
                              Password icon
                              I agree to the terms of service
                              Signed in as (Sign out)
                              You have left! (?) (thinking…)
                              1 comment  ·  Boxshot Formats  ·  Flag idea as inappropriate…  ·  Admin →
                            • Koru: Have an "export view" button in the webviewer.

                              When viewing the artwork in the browser you can easily see the whole artwork and even have custom snapshots for pre defined views. But there is no way to export this view to a .png or .jpg

                              4 votes
                              Vote
                              Sign in
                              Check!
                              (thinking…)
                              Reset
                              or sign in with
                              • facebook
                              • google
                                Password icon
                                I agree to the terms of service
                                Signed in as (Sign out)
                                You have left! (?) (thinking…)
                                1 comment  ·  Koru  ·  Flag idea as inappropriate…  ·  Admin →
                              • Posibility of "for machine packaging" in dieline creator

                                The current dieline creator can make boxes for manual packaging. For machine packaging a small slit is needed along the lid and the dust panels, for better manoeuvring in the packaging machines.
                                Therefore this option should be available, so that the system can create files that are also usable for productions that are to be packed on machines.

                                6 votes
                                Vote
                                Sign in
                                Check!
                                (thinking…)
                                Reset
                                or sign in with
                                • facebook
                                • google
                                  Password icon
                                  I agree to the terms of service
                                  Signed in as (Sign out)
                                  You have left! (?) (thinking…)
                                  0 comments  ·  Origami  ·  Flag idea as inappropriate…  ·  Admin →
                                • Pharma tube bottom or end

                                  The current Pharma tube on Boxshot only has zig zag like option of the bottom or end. This is normally seen on plastic tubes, however aluminium ones will fold in. It will be great to have the 2 options for the bottom/end of the tubes. Please see the reference I have added in the link below.
                                  https://www.dropbox.com/s/v60lwzrgqe4u43a/Pharma_tube_bottom.jpg?dl=0

                                  7 votes
                                  Vote
                                  Sign in
                                  Check!
                                  (thinking…)
                                  Reset
                                  or sign in with
                                  • facebook
                                  • google
                                    Password icon
                                    I agree to the terms of service
                                    Signed in as (Sign out)
                                    You have left! (?) (thinking…)
                                    0 comments  ·  Boxshot Shapes  ·  Flag idea as inappropriate…  ·  Admin →
                                  • Create an iPad Pro Version

                                    I know this isn't exactly a "feature" request, but it would be really great to run Boxshot on my iPad Pro instead of having to go back to my Mac to stage and render a 3D scene. Any chance of that happening?

                                    1 vote
                                    Vote
                                    Sign in
                                    Check!
                                    (thinking…)
                                    Reset
                                    or sign in with
                                    • facebook
                                    • google
                                      Password icon
                                      I agree to the terms of service
                                      Signed in as (Sign out)
                                      You have left! (?) (thinking…)
                                      1 comment  ·  Boxshot Other  ·  Flag idea as inappropriate…  ·  Admin →
                                    • Add Greetings card shape

                                      A simple folded greetings card - image for front and back and possibly inside.

                                      3 votes
                                      Vote
                                      Sign in
                                      Check!
                                      (thinking…)
                                      Reset
                                      or sign in with
                                      • facebook
                                      • google
                                        Password icon
                                        I agree to the terms of service
                                        Signed in as (Sign out)
                                        You have left! (?) (thinking…)
                                        1 comment  ·  Boxshot Shapes  ·  Flag idea as inappropriate…  ·  Admin →
                                      • 1 vote
                                        Vote
                                        Sign in
                                        Check!
                                        (thinking…)
                                        Reset
                                        or sign in with
                                        • facebook
                                        • google
                                          Password icon
                                          I agree to the terms of service
                                          Signed in as (Sign out)
                                          You have left! (?) (thinking…)
                                          0 comments  ·  Flag idea as inappropriate…  ·  Admin →
                                        • "Good Enough" Button when rendering in Boxshot

                                          Too often I don't do a quick render due to the artifacts in the shadows.

                                          I render at high quality and the artifacts are usually gone in the first minute or so of rendering.

                                          It would be great if there was a "good enough" button that would stop the rendering at the desired point and then you can save off the image.

                                          3 votes
                                          Vote
                                          Sign in
                                          Check!
                                          (thinking…)
                                          Reset
                                          or sign in with
                                          • facebook
                                          • google
                                            Password icon
                                            I agree to the terms of service
                                            Signed in as (Sign out)
                                            You have left! (?) (thinking…)
                                            1 comment  ·  Boxshot Rendering  ·  Flag idea as inappropriate…  ·  Admin →
                                          ← Previous 1 3 4 5 15 16
                                          • Don't see your idea?

                                          Feedback and Knowledge Base